Responses of tomato hybrid cultivars to soil application of humic acid under greenhouse conditions

Abstract Responses of three tomato (Lycopersicon esculentum Mill.) hybrids viz. 'Luanova', 'Savarona' and 'Tessera' to various doses (0, 0.5, 1.0, 1.5 and 2.0 g L-1) of soil application of humic acid (HA) were evaluated in terms of plant growth, productivity and quality of fruits, under greenhouse conditions, during 2011-12 and 2012-13. In addition to improved quality characteristics, higher values for yield and yield components were recorded for tomato fruits harvested from plants of 'Tessera' cultivar compared to those harvested from other hybrids tested, regardless of growing seasons. Plants from 'Luanova' cultivar were, however, earlier in fruiting with higher number of fruits per plant. Soil application of HA presented positive effects on yield and physicochemical quality of tomato fruits irrespective of the dose of HA and the cultivar investigated, in both seasons. Soil application of HA at higher dose 1.5 g L-1 exhibited better results in all the three tomato cultivars tested, in terms of their vegetative and reproductive growth, and significantly improved the physicochemical quality of their fruits. Conclusively, the tomato hybrid 'Tessera' was found suitable for cultivation under greenhouse conditions while soil application of aqueous solution of HA @ 1.5 g L-1 substantially resulted in higher production of quality tomato fruits.

Resumo Respostas de três híbridos de tomate (Lycopersicon esculentum Mill.) viz. 'Luanova', 'Savarona' e 'Tessera' para várias doses (0, 0,5, 1,0, 1,5 e 2,0 g L-1) de aplicação de ácido húmico (AH) no solo foram avaliadas em termos de crescimento da planta, produtividade e qualidade de frutas, em casa de vegetação, durante 2011-12 e 2012-13. Além das características de qualidade melhoradas, valores mais elevados para o rendimento e os componentes do rendimento foram registrados para frutos de tomate colhidos de plantas do cultivar 'Tessera' em comparação com aqueles colhidos de outros híbridos testados, independentemente das estações de cultivo. As plantas do cultivar 'Luanova', no entanto, frutificaram mais cedo com maior número de frutos por planta. A aplicação de AH no solo apresentou efeitos positivos sobre a produtividade e a qualidade físico-química dos frutos de tomate, independentemente da dose de AH e do cultivar investigado, nas duas safras. A aplicação de HA no solo na dose maior de 1,5 g L-1 apresentou melhores resultados nos três cultivares de tomate testados, quanto ao crescimento vegetativo e reprodutivo, e melhorou significativamente a qualidade físico-química dos frutos. Conclusivamente, o híbrido de tomate 'Tessera' foi considerado adequado para cultivo em casa de vegetação, enquanto a aplicação no solo de solução aquosa de HA @ 1,5 g L-1 resultou substancialmente em maior produção de frutos de tomate de qualidade.

THE IMPACT OF SUPPLY CHAIN MANAGEMENT PRACTICES ON PRODUCTIVITY

The purpose of the study is to test the impact of supply chain management practices on productivity of the organisation. Additionally, investigated the relationship between supply chain management practices and organisational productivity. The type of research used is descriptive in nature.. The study was conducted on the basis of various factors like risk management, process, delivery and planning and how organisational productivity can be improved through these factors of supply chain management practices. The paper revealed that there is a relationship between supply chain management practices and organisational productivity. It also revealed that there is an impact of supply chain management practices on organisational productivity. As far as the researcher is aware,this paper is rst to investigate the impact of supply chain management practices on organisational productivity with factors like quality management, inventory management and transportation and the researcher has done the study on different factors like risk management, planning, process and delivery

Evolución de la eficiencia y la productividad del sistema de salud público chileno entre 2010 y 2019 / Efficiency and productivity of the Chilean public health system between 2010 and 2019

Introducción Frente al fuerte incremento del gasto en salud, es necesario indagar si ha venido acompañado de aumentos proporcionales en la producción de atenciones de salud dirigidas a los beneficiarios del Fondo Nacional de Salud. Métodos En esta investigación observacional, descriptiva y longitudinal retrospectiva estimamos la eficiencia técnica del Sistema Nacional de Servicios de Salud a través del costo medio de producción y la productividad media del trabajo en el periodo de 2010 a 2019. Resultados Durante la década estudiada, la producción ha aumentado en torno al 6% anual; la dotación de trabajadores aumentó (mayormente en el estamento médico) 61%; el gasto en remuneraciones aumentó 106% real; el gasto en bienes y servicios de consumo ha aumentado 25% real; la eficiencia del gasto ha disminuido 21% y la productividad es el elemento menos dinámico del sistema con 0,6% de crecimiento medio anual. Tras sustraer el componente de exámenes diagnósticos, el escenario empeora. Conclusiones Los resultados muestran que el mayor gasto en salud no ha venido aparejado de aumentos proporcionales en producción, traduciéndose en una caída en la eficiencia del gasto sanitario y aumentos magros o caídas en productividad, según cómo se mida la producción. Esto hace que la estrategia de crecimiento del sector público dependa principalmente de aumentos en la dotación de trabajadores. Esta baja productividad constituye una limitante seria para mejorar el acceso de los beneficiarios del Fondo Nacional de Salud a las atenciones de salud y contribuye a incrementar las listas de espera. Especial atención debiera brindarse a los costos medios de producción y a la productividad media del trabajo en un escenario de menor dinamismo en el crecimiento del gasto público en salud y de reforma del sistema de salud.

Introduction In view of the strong increase in health expenditure, it is necessary to investigate whether proportional increases in healthcare production for the beneficiaries of the National Health Fund have corresponded to this increase. Methods In this observational, descriptive, and retrospective longitudinal research, we estimate the technical efficiency of the National Health Services System through the average cost of production and average labor productivity in the period from 2010 to 2019. Results During the studied decade, production has increased by approximately 6% annually; the number of workers increased (mostly physicians) by 61%; spending on salaries increased by 106% in real terms; spending on consumer goods and services has increased by 25% in real terms; the efficiency of spending has decreased by 21%, and productivity is the least dynamic element of the system with an average annual growth rate of 0.6%. After subtracting the diagnostic tests component, this scenario worsens. Conclusions The results show that higher health expenditure has not been matched by commensurate increases in output, translating into a fall in the efficiency of healthcare expenditure and meager increases or falls in productivity, depending on how the output is measured. This means that the public sector's growth strategy depends mainly on increases in the number of workers. This low productivity is a serious constraint to improving healthcare access for National Health Fund beneficiaries and contributes to increasing waiting lists. Special attention should be paid to average production costs and average labor productivity in a scenario of less dynamic growth in public health spending and health system reform.

Variables de medición del desempeño para la toma de decisiones en organizaciones deportivas: una revisión sistemática de literatura

R E S U M E N En el campo de estudio de la gestión organizacional, la medición del desempeño es de gran relevancia, ya que mide la capacidad de las organizaciones para cumplir sus objetivos. De esta forma, las directivas de la empresa pueden analizar desde diferentes niveles su gestión en relación con los procesos, objetivos, recursos, estrategias y cultura. Sin embargo, las organizaciones deportivas cuentan con diferentes públicos de interés, así como diversos tipos de análisis de acuerdo con su estructura y comportamiento organizacional, lo cual genera disparidad en los procesos de verificación y control asociados a la medición del desempeño para el logro de los objetivos organizacionales. Es por esto por lo que se hace necesario generar conocimiento en esta área. Esta investigación tiene como objetivo identificar variables de medición del desempeño aplicables a las organizaciones deportivas, que contribuya al fortalecimiento de la toma de decisiones. La metodología utilizada fue una revisión sistemática de literatura, posteriormente un análisis a través del software NVivo. Como resultado principal, se encontró el hallazgo de siete principales variables de medición del desempeño aplicables a las organizaciones deportivas: la creatividad, la innovación, la productividad, la eficiencia, la eficacia, la competitividad y la rentabilidad.

In the field of study of organizational management, performance measurement is of great relevance, since it measures the capacity of organizations to meet their objectives. In this way company directors can analyze their management from different levels in relation to processes, objectives, resources, strategies and culture. However; sports organizations have different publics of interest, as well as various types of analysis according to their structure and organizational behavior; which generates disparity in the verification and control processes associated with performance measurement for the achievement of objectives. organizational goals. This is why it is necessary to generate knowledge in this area. This research aims to identify performance measurement variables applicable to sports organizations, which contributes to the strengthening of decision-making. The methodology used was a systematic literature review, followed by an analysis using the NVivo software. As a main result, the finding of seven main performance measurement variables applicable to sports organizations was found: creativity innovation, productivity, efficiency effectiveness, competitiveness and profitability.

No campo da gestão organizacional, a medição do desempenho é de grande relevância, pois mede a capacidade das organizações de atingir seus objetivos. Desta forma, a administração da empresa pode analisar sua gestão em diferentes níveis em relação a processos, objetivos, recursos, estratégias e cultura. Entretanto, as organizações esportivas têm diferentes públicos de interesse e diferentes tipos de análise de acordo com sua estrutura e comportamento organizacional, o que gera disparidade nos processos de verificação e controle associados à medição de desempenho para a realização dos objetivos organizacionais. É por isso que é necessário gerar conhecimento nesta área. Esta pesquisa visa identificar variáveis de medição de desempenho aplicáveis às organizações esportivas que contribuem para fortalecer a tomada de decisões. A metodologia utilizada foi uma revisão sistemática da literatura, seguida por uma análise utilizando o software NVivo. O principal resultado foi a descoberta de sete variáveis principais de medição de desempenho aplicáveis às organizações esportivas: criatividade, inovação, produtividade, eficiência, eficácia, competitividade e lucratividade.

RESEARCH SCENARIO OF ALL INDIA INSTITUTE OF MEDICAL SCIENCES (AIIMS) DELHI DURING 2017-21: A BIBLIOMETRIC STUDY

The paper reflects research output of AIIMS (India) during 2017 to 2021 using data from Scopus database. It shows the research output by the medical scholars of the institute, high profiled authors, and Research collaborations on International and National basis and top sources of publications preferred during the year period. The study finds that research contribution of AIIMS, Delhi during five years was 12797 publications; Maximum productivity was marked in the year 2021 followed by its preceding year 2020; Highest publications were published in the source 'BMJ Case Reports' (515 papers); Highest collaboration was made with USA in publication of research papers (1154 papers); Highest research produce was made by Tripathi, M. (196 Papers) followed by Sharma N. and Tandon N. (195 papers each).

Association between job burnout and health-related productivity loss among enterprise staff in Minhang District of Shanghai / 环境与职业医学

Background At present, domestic research on job burnout and health-related productivity is limited to medical workers, and the impact of job burnout on health-related productivity of enterprise staff deserves attention. Objective To explore the association between job burnout and health-related productivity loss among enterprise staff. Methods A cross-sectional online questionnaire survey was conducted among enterprise staff who were selected from seven enterprises in Minhang District of Shanghai. The Chinese version of Maslach Burnout Inventory-General Survey (MBI-GS) was used to assess job burnout, and a questionnaire based on and modified from the WHO Health and Work Performance Questionnaire was used to assess the loss of health-related productivity. Logistic regression was used to analyze the impact of job burnout on health-related productivity under the control of selected demographic characteristics, socio-economic factors, and occupational factors. Results A total of 3489 questionnaires were recovered, and 3156 valid questionnaires were included in the statistical analysis. Among the 3156 valid questionnaires, 2228 (70.8%) respondents were assessed as suffering from job burnout, in which 1858 (59.0%) were mild to moderate job burnout, and 370 (11.7%) were severe job burnout; the median score (interquartile range) of MBI-GS was 2.18（2.69）, the median rates (interquartile range) of absenteeism and presenteeism were 0.00% (0.00%) and 20.00% (50.00%), respectively. The prevalence of presenteeism significantly varied by gender, education, marital status, working years, job category, exhaustion, cynicism, professional efficacy, and job burnout (P<0.05). The prevalence of absenteeism significantly varied by education, marital status, working years, job category, exhaustion, cynicism, professional efficacy, and job burnout (P<0.05). Job burnout was positively correlated with absenteeism (r=0.157) and presenteeism (r=0.412) (P<0.01). After controlling for selected demographic characteristics, social economic factors, and occupational factors, the logistic regression showed that job burnout was associated with health-related productivity loss, the OR value remained relatively stable, and referring to negative job burnout, the OR (95%CI) of severe job burnout was 6.35 (4.52-8.92). Conclusion Job burnout of enterprise staff has a negative impact on health-related productivity. Severer job burnout associates with higher health-related productivity loss. Enterprises should pay attention to the prevention and control of job burnout to reduce health-related productivity loss.

Bibliometrics of Sudanese scientific publications: Subjects, institutions, collaboration, citation and recommendations / Bibliometría de publicaciones científicas sudanesas: temas, instituciones, colaboración, citas y recomendaciones

Abstract Introduction: Sudan is the third largest country in Africa and has rich reserves of petroleum and other ground resources, but its per capita Gross Domestic Product is only $808 and researchers work in insufficient institutional facilities and with little funding. Previous studies about its scientific productivity have been limited to specific subjects and relatively short periods, with no large analyses until now. Objective: To analyze the scientific output of Sudan in depth, considering all research areas and several decades of scientific activity. Methods: We retrieved the documents with "Sudan" in field country in the Science Citation Index Expanded for the period 1900-2019. Results: We retrieved over 9 000 publications and found that most were articles; that citation was higher for review articles and book chapters, and that this index mostly covered articles in English. Beginning in 1972, the number of publications in this database has increased rapidly. The citation lifespan indicates slow growth in the Sudanese scientific literature, and collaboration is frequent both nationally and internationally, possibly because the scarce resources make collaboration almost compulsory. Most external collaboration is done with Saudi Arabia but citation is higher for articles resulting from international megaprojects, led by Europe and the USA, in which Sudanese researchers play secondary roles. Research focusses on applied technological subjects with little innovation value. Women play a smaller role in Sudanese science. Conclusions: Our recommendations for Sudanese science include increasing the number of women in leading research positions; providing funding directly to researchers (i.e., bypassing bureaucratic bodies); increasing basic research to avoid stagnation; training Sudanese researchers for leading positions; and identifying specific research areas where Sudan can lead in its region.

Resumen Introducción: Sudán es el tercer país más grande de África y tiene ricas reservas de petróleo y otros recursos terrestres, pero su Producto Interno Bruto per cápita es de solo $ 808 y los investigadores trabajan en instalaciones institucionales deficientes y con poca financiación. Los estudios previos sobre su productividad científica se han limitado a temas específicos y períodos relativamente cortos. Objetivo: Analizar la producción científica de Sudán en profundidad, considerando todas las áreas de investigación y varias décadas. Métodos: Recuperamos los documentos con "Sudán" como país de origen en el Science Citation Index Expanded para el período 1900-2019. Resultados: Hallamos más de 9 000 publicaciones y encontramos que la mayoría eran artículos; que fueron más citados los artículos de revisión y capítulos de libros, y que esta base de datos cubría principalmente artículos en inglés; desde 1972, el número de publicaciones en ella ha aumentado rápidamente. La vida útil de las citas indica un crecimiento lento en la literatura científica sudanesa, y la colaboración es frecuente tanto a nivel nacional como internacional, posiblemente porque los escasos recursos hacen que la colaboración sea casi obligatoria. La mayor parte de la colaboración externa se realiza con Arabia Saudita, pero hay más citas para los artículos resultantes de megaproyectos internacionales, dirigidos por Europa y Estados Unidos, en los cuales los investigadores sudaneses desempeñan papeles secundarios. La investigación se centra en temas de tecnología aplicada con poco valor de innovación. Conclusiones: Nuestras recomendaciones para la ciencia sudanesa incluyen aumentar el número de mujeres en altos puestos; proporcionar financiación directamente a los investigadores (sin pasar por organismos burocráticos); ir más allá de la investigación aplicada para evitar el estancamiento; capacitar al personal sudanés para puestos de liderazgo; e identificar áreas de investigación específicas donde Sudán puede liderar en su región.

Half a century of Sri Lanka research: Subjects, researchers, institutions, journals and impact (1973-2019) / Medio siglo de investigación en Sri Lanka: temas, investigadores, instituciones, revistas e impacto (1973-2019)

Abstract Introduction: Bibliometric analyses of research in Sri Lanka, a lower-middle income island nation in South Asia, has focused mainly on medical research, concluding that there is a need for increased research productivity and impact, and for local solutions to health concerns. There has been no general bibliometric analysis across scientific disciplines in the nation, or any study that covers a long period of time to identify general time trends. Objective: To measure and analyse Sri Lanka research by focusing on subjects, authors, institutions, journals and citation for half a century. Methods: We used an advanced search method to extract publications with the word "Sri Lanka" in the SCI-EXPANDED, and calculated indicators such as total citations from Web of Science Core Collection since publication year to the end of 2019, citations in 2019, and mean citations per publication. Journal data were taken from 2019 Journal Citation Report. Affiliation re-classification was done to ensure consistency regarding the origin of all publications. Publications were further analysed based on collaboration, and first and corresponding authorship. Results: We retrieved 16 069 publications in 19 document types (77 % articles). Corrections had the highest number of authors per publication (616) followed by articles (116). Four articles had more than 5 000 authors and 593 articles had more than 1 000 authors. The highest citations in this database were for international megaprojects where Sri Lanka authors played minor roles. The UK had the most collaborative articles with Sri Lanka (19 %). The articles were published in 3 051 journals across 177 Web of Science categories. The category of Public, environmental and occupational health, with 193 journals, had 6.7 % of all articles, followed by environmental sciences (6.6 %). Conclusion: Sri Lanka has an unusually strong pattern of participating as small role players in international megaprojects about health and physics. Sri Lanka authors should be encouraged to expand their horizons by researching non-applied fields that are the basis of all innovation; to strengthen their own journals so that they have better visibility and impact, and to improve their positions in international projects that are published in larger journals.

Resumen Introducción: Los análisis bibliométricos de la investigación en Sri Lanka, una nación insular de ingresos mediano-bajos en el sur de Asia, se han centrado principalmente en la investigación médica, concluyendo que existe la necesidad de aumentar la productividad y el impacto de la investigación, y de soluciones locales a los problemas de salud. No ha habido un análisis bibliométrico general de disciplinas científicas o algún estudio que cubra un período largo de tiempo para identificar tendencias generales. Objetivo: Medir y analizar la investigación de Sri Lanka centrándose en temas, autores, instituciones, revistas y citas, durante medio siglo. Métodos: Utilizamos un método de búsqueda avanzada para extraer publicaciones con las palabras "Sri Lanka" en el SCI-EXPANDED, y calculamos indicadores como el total de citas de Web of Science Core Collection desde el año de publicación hasta finales de 2019, citas solo en 2019, y media de citas por publicación. Los datos de revistas son del Journal Citation Report 2019. Revisamos manualmente las afiliaciones para garantizar su coherencia, y, de todos los tipos de publicación, analizamos en detalle los artículos en función de la colaboración y la autoría. Resultados: Hallamos 16 069 publicaciones en 19 tipos de documentos (77 % artículos). Las correcciones tuvieron el mayor número de autores por publicación (616), seguidas de los artículos (116 autores en promedio); cuatro artículos tenían más de 5 000 autores y 593 artículos tenían más de 1 000 autores. Las citas más altas en esta base de datos fueron para megaproyectos internacionales en los que los autores de Sri Lanka desempeñaron papeles menores. El Reino Unido tuvo más artículos colaborativos con Sri Lanka (19 %). Los artículos se publicaron en 3 051 revistas de 177 categorías del Web of Science. La categoría d Salud pública, ambiental y ocupacional, con 193 revistas, tuvo el 6.7 % del total de artículos, seguida de Ciencias ambientales (6.6 %). Conclusión: En Sri Lanka hay una tendencia inusual a participar como pequeños actores en megaproyectos internacionales sobre salud y física. Debería alentarse a quienes hacen ciencia en Sri Lanka a ampliar sus horizontes investigando campos no aplicados, que son la base de la innovación; a fortalecer sus propias revistas para lograr mayor visibilidad e impacto, y a mejorar su ubicación en proyectos internacionales que se publican en revistas más grandes.

Respuesta del banano clon Valery en alta densidad a la inoculación con micorrizas y fósforo en Apartadó - Colombia

El cultivo de banano en el Urabá Antioqueño viene presentando disminución en los rendimientos, lo que exige la búsqueda de alternativas para incrementar o mantener la producción actual, entre las cuales, se encuentra el aumento en la proporción de fertilizantes inorgánicos, conllevando a sobrecostos y problemas ambientales. En vista de esta situación, se ha generado un interés por el uso de biofertilizantes, como el caso de las micorrizas (HFM), con las que se han demostrado beneficios al sistema suelo-planta. El objetivo de esta investigación fue evaluar el efecto de los HFM con la disminución de la dosis fosforada en el clon de banano Valery, en un sistema de alta densidad, bajo condiciones edafoclimáticas de Apartadó-Antioquia. Para ello, en los tratamientos, al momento de la siembra, se realizaron inoculaciones de 100 g de HFM comercial con 5 dosis de fósforo, que correspondieron a: 0, 25, 50, 75 y 100 kg*ha-1. Se midieron variables morfológicas, rendimiento y simbiosis micorrízica. El diseño experimental fue completamente al azar, con 3 repeticiones; cada unidad experimental estuvo constituida por 10 plantas contenidas en 5 sitios. La información se procesó con el programa estadístico SAS 9.1, se obtuvo el análisis de varianza y una prueba de comparación de medias (Tukey), con un nivel de significancia del 95 %. No se encontraron diferencias significativas en las variables morfológicas, pero sí en las variables productivas, siendo el tratamiento HFM + 50 kg P2O5*ha-1 el de mejor resultado y, además, presentó el mayor porcentaje de colonización micorrízica, con 59,5 %.

The banana crop in Uraba Antioqueño has been presenting a decrease in the yields, which requires the search for alternatives to increase or maintain current production, among which is the increase in the proportion of inorganic fertilizers leading to cost overruns and environmental problems. In view of this situation, there has been a growing interest in the use of biofertilizers such as mycorrhiza (HFM) with which multiple benefits to the soil-plant system have been demonstrated. The objective of this research was to evaluate the effect of HFM with the reduction of phosphorus dose in the Valery banana clone under a high-density system under edaphoclimatic conditions of Apartado-Antioquia. For this purpose, 100 g of commercial HFM were inoculated with 5 doses of phosphorus at time of sowing, corresponding to: 0, 25, 50, 75 and 100 kg*ha-1. Morphological variables, performance and mycorrhizal symbiosis were measured. The experimental design was completely random with 3 repetitions, each experimental unit was made up of 10 plants contained in 5 sites. The information was processed with the statistical program SAS 9.1, variance analysis was obtained and a mean comparison test (Tukey) with a significance level of 95 %. No significant differences were found in the morphological variables, but in the productive variables, the HFM + 50 Kg P2O5*ha-1 treatment was the best and also presented the highest percentage of mycorrhizal colonization with 59.5 %.

Productividad y curvas de crecimiento usando modelos no lineales en un cruce de ovino de pelo colombiano x pelibuey

Los ovinos criollos de pelo (OCP) desarrollaron ventajas adaptativas al climática tropical, que le permiten tener resistencia a enfermedades, alta fertilidad y prolificidad; sin embargo, se reportan pocas investigaciones sobre la productividad de los OCP en sistemas asociados al cultivo de la caña, lo que hace necesario realizar investigaciones, que permitan fomentar sus atributos. El objetivo del presente trabajo fue analizar la productividad y el desarrollo corporal de un cruce de OCP, mediante parámetros productivos y curvas de crecimiento. Se utilizaron 180 animales de partos simples y múltiples; se registró el peso al nacimiento (PN), al destete (PD), a los 210 días (PAJ210) y las ganancias diarias predestete (GDPRE) y posdestete (GDPOS). Los datos, se analizaron mediante estadística descriptiva, con un GLM, con los efectos sexo (S), tipo de nacimiento (TN), número de partos (NP) y época de nacimiento (EPONAC). Se emplearon los modelos no lineales Gompertz, Logístico, Brody, Richards y Von Bertalanffy, en 1.455 registros de pesos, a diferentes edades, para realizar las curvas de crecimiento. Los análisis, se efectuaron con el paquete estadístico SAS. Se consideraron los coeficientes R2, AIC y BIC, obtenidos por el método de Gauss-Newton, para seleccionar el modelo de mejor ajuste. Los machos presentaron mayores promedios en las variables PN, PD, PAJ210 y GDPOS. El TN afectó todas las variables; el PN y las GDPOS fueron afectadas por el NP y, la EPONAC, afectó PN, las GDPRE, el PAJ210 y las GDPOS. El modelo de mejor ajuste para las curvas de crecimiento fue la de Richards.

The creole hair sheep (CHS) developed adaptive advantages to the tropical climate, which allow them to have resistance to diseases, high fertility and prolificacy. Currently, there is little research on the productivity of CHS in systems associated with the cultivation of sugarcane, which makes it necessary to carry out research to promote its attributes. The purpose of this research was to analyze the productivity and body development of a crossing of CHS, using production parameters and growth curves.180 animals of single and multiple births were used; the follow weight was recorded: at birth (WB), at weaning (WW); at 210 days (W210), and furthermore, daily gains of pre-weaning (WDPRE) and post-weaning (WPPOS) were recorded. The data were analyzed using descriptive statistics with a GLM with the effects sex (S), type of birth (TB), number of births (NB) and period of birth (PB). The non-linear models Gompertz, Logistic, Brody, Richards and Von Bertalanffy were used in 1455 records of weights at different ages to perform growth curves. All analyzes were performed with the SAS statistical package. The R2, AIC and BIC coefficients obtained by the Gauss-Newton method were considered to select the best fit model. The males presented higher averages in the variables WB, WW, W210) and WPOS. The TB affected all the variables; The WB and the WPPOS were affected by the NB and the PB affected the WB, the WDPRE, the W210 and the WPPOS. The best fit model for the growth curves was of Richards.

Productividad laboral en pacientes con artritis reumatoide temprana / Work productivity in patients with early rheumatoid arthritis

Introducción: La artritis reumatoide tiene un importante impacto sobre la función física y la productividad laboral. Objetivo: Determinar la productividad laboral de los pacientes con artritis reumatoide temprana identificando su relación con variables sociodemográficas y clínicas. Método: Se realizó un estudio observacional descriptivo de corte transversal en 53 pacientes atendidos en el Centro de Referencia de Enfermedades Reumáticas entre enero a diciembre de 2019. Para evaluar la productividad laboral se utilizó el cuestionario WPAI-AR. Resultados: Predominaron los pacientes entre los 35-55 años de edad (60,4 por ciento), el sexo femenino (60,4 por ciento). La productividad laboral medida a través de WPAI-AR reportó durante los últimos 7 días una media de 4,64 horas laborales perdidas, secundaria a la artritis reumatoide, con un porciento de pérdida por ausentismo del 16,5 por ciento y presentismo del 59,6 por ciento. Conclusiones: El mayor porciento de afectación de la productividad laboral le correspondió al presentismo. Se encontró asociación entre la pérdida de productividad laboral y la actividad clínica, la discapacidad funcional y la calidad de vida relacionada con la salud(AU)

Introduction: rheumatoid arthritis has been reported to have a significant impact on physical function and work productivity. Objectives: To determine the labor productivity of patient's diagnosis with early rheumatoid arthritis and to identify its possible relationship with sociodemographic and clinical variables. Methods: A cross-sectional descriptive observational study was carried out in 53 patients treated at the Reference Center for Rheumatic Diseases between January to December 2019. To evaluate labor productivity, the WPAIR AR questionnaire was used. Results: patients between 35-55 years of age predominated 60.4 percent, the female sex 60.4 percent. Labor productivity measured by WPAI AR reported during the last 7 days an average of 4.64 working hours lost, secondary to early rheumatoid arthritis, with a percentage of loss due to absenteeism of 16.5 percent and presenteeism of 59.6 percent. Conclusion: Conclusion: the highest percentage of affectation of labor productivity corresponded to labor presenteeism. Loss of work productivity was significantly associated with clinical activity, functional capacity, and health-related quality of lifepor ciento(AU)

Transport Cost And Marketing Of Banana In Chikkamagaluru District

The present study mainly focused on the growing of banana is the prominent activity in the region of Malnad purely from the Karnataka state. This district shows the crucial role for transport and marketing channels. Hence, for this reason the current study analysed the role of these channels in our study area

Produtividade de híbridos de milho pipoca submetidos a diferentes populações na semeadura / Productivity of poppy corn hybrids submitted to different populations in seeding / Productividad de híbridos de maíz poppy presentados a poblaciones diferentes en la sembrada

Quando se trata de milho pipoca o Brasil é o segundo maior produtor, mas necessitando ainda de importações para suprir a demanda interna do país, visto a importância de estudos que melhor explorem as recomendações agronômicas para a cultura do milho pipoca. Assim, o presente estudo objetivou avaliar o impacto da população de plantas sobre algumas variáveis morfológicas e na produtividade final de grãos de dois híbridos de milho pipoca (8203 e 4512). Foram estudadas as populações de 60.000, 65.000, 70.000, 75.000 e 80.000 plantas por ha-1 no espaçamento de 0,45cm entre linha de semeadura. O experimento foi conduzido no ano agrícola 2018/2019, na área experimental do Departamento de Ciências Agronômicas e Ambientais da Universidade Federal de Santa Maria, campus Frederico Westphalen ­ RS, em um delineamento de blocos casualizados em um esquema fatorial (2x5). O diâmetro de colmo, comprimento da espiga e peso de mil sementes diminuíram à medida que se aumentou a população de plantas. Para ambos os híbridos, e para a maioria das variáveis analisadas as densidades populacionais não interferiram de forma significativa na produtividade final de grãos do milho pipoca. Entretanto quando se trabalha a média das populações se observa uma superioridade do híbrido 8203 para as variáveis, altura de planta, altura de inserção da espiga, prolificidade, empalhamento, diâmetro de espiga, número de grãos por espiga, peso de mil sementes e produtividade final de grãos.(AU)

When it comes to popcorn, Brazil is the second largest producer, but still needing imports to supply the country's domestic demand, given the importance of studies that better explore agronomic recommendations for popcorn culture. Thus, the aim of the present study was to evaluate the impact of the plant population on some morphological variables and the final consumption of two hybrid popcorn kernels (8203 and 4512). The populations of 60.000, 65.000, 70.000, 75.000 and 80.000 plants per ha-1 were studied in the 0.45cm spacing between sowing lines. The experiment was carried out in the agricultural year 2018/2019, in the experimental area of the Department of Agricultural and Environmental Sciences of the Federal University of Santa Maria, Frederico Westphalen campus - RS, in a randomized block design in a factorial scheme (2x5). The stem diameter, ear length and weight of a thousand seeds decreased as the plant population increased. For both hybrids, and for most of the variables analyzed, population densities did not significantly affect the final grain yield of popcorn. However, when working with the average population, a superiority of the 8203 hybrid is observed for the variables, plant height, height of ear insertion, prolificacy, stuffing, ear diameter, number of grains per ear, weight of a thousand seeds and final productivity of grain.(AU)

En lo que respecta a las palomitas de maíz, Brasil es el segundo mayor productor, pero aún necesita importaciones para satisfacer la demanda interna del país, dada la importancia de los estudios que exploran mejor las recomendaciones agronómicas para el cultivo de palomitas de maíz. Por lo tanto, el objetivo del presente estudio fue evaluar el impacto de la población de plantas en algunas variables morfológicas y en el rendimiento final de grano de dos híbridos de palomitas de maíz (8203 y 4512). Se estudiaron las poblaciones de 60.000, 65.000, 70.000, 75.000 y 80.000 plantas por ha-1 en el espacio de 0.45cm entre líneas de siembra. El experimento se realizó en el año agrícola 2018/2019, en el área experimental del Departamento de Ciencias Agronómicas y Ambientales de la Universidad Federal de Santa María, campus Frederico Westphalen - RS, en un diseño de bloques al azar en un esquema factorial (2x5). El diámetro del tallo, la longitud de la mazorca y el peso de mil semillas disminuyeron à medida que aumentó la población de plantas. Para ambos híbridos, y para la mayoría de las variables analizadas, las densidades de población no afectaron significativamente el rendimiento final de grano de las palomitas de maíz. Sin embargo, cuando se trabaja con la población promedio, se observa una superioridad del híbrido 8203 para las variables, altura de la planta, altura de inserción de la mazorca, prolificidad, relleno, diámetro de la mazorca, número de granos por mazorca, peso de mil semillas y productividad final de grano.(AU)

Burden of COVID-19: DALY and Productivity Loss for Karnataka, India

Background: COVID?19 is a pandemic that is devastating the world right now quelling over 2.5 million people worldwide. Similarly, in India and its largest southern state Karnataka, the coronavirus is responsible for around 161,000 and 12,449 deaths, respectively. These numbers capture the havoc caused by this novel coronavirus, but fail to discern the complete picture. Objectives: Broadly, this study aimed to study the mortality, morbidity, and the economic issues inflicted by the COVID?19 in the state of Karnataka. Specifically, the study used publically available epidemiological data to study both mortality and morbidity by means of disability?adjusted life years(DALYs). Furthermore, the study aimed at estimating the permanent losses to the state gross domestic product (SGDP) due to the pandemic. Materials and Methods: Publicly available epidemiological data are used from selected sources and DALYs are computed. The permanent loss to the SGDP is estimated using the human capital approach. Results: The total DALYs for Karnataka are computed to be 22,506 of which 22,041 correspond to mortality and remaining correspond to morbidity. Financially, Karnataka lost around 208 years of productive years of lives costing around ?590 million rupees to the SGDP. Conclusions: It is found that major burden of COVID?19 during study period is due to mortality. Morbidity accounts for around 2% of the total DALYs. Males are the most affected by the mortality and also the morbidity. With respect to loss in productivity, the losses due to premature mortality of COVID-19 amounted to ?590 million.

Estudio bibliométrico de las publicaciones en cirugía de columna en México / Publications on spine surgery in Mexico: a bibliometric study

Resumen: Introducción: el análisis bi-bliométrico es una forma útil de evaluar el pasado, el pre-sente y el futuro de las publicaciones relacionadas con un área determinada de forma cualitativa y cuantitativa. Objetivo: determinar las características de la productividad nacional en investigación escrita por autores mexicanos en el campo de cirugía de columna a través del tiempo. Material y métodos: se realizó una búsqueda exhaustiva en línea en Octubre de 2021 utilizando la base de datos Scopus desarrollada por Elsevier. La información de las publicaciones recolectadas fue la siguiente: año, título, acceso, idioma, revista, tipo de artículo, tema, objetivo, citas, autores e instituciones de afiliación. Resultados: se identificó un total de 404 publicaciones entre 1973 y 2021. El número de publicaciones entre la década 1991-2000 y 2011-2021 incrementó 68.28 veces. La mayoría de las publicaciones se realizaron en instituciones de la región centro-sur de México (66.16%), seguida de la región occidente (15.03%) y noreste (8.27%). El índice H más alto encontrado fue de revistas de origen estadounidense (102). La mayor parte de las publicaciones se realizó en la revista Coluna/Columna (15.53%), seguida de Cirugía y Cirujanos (10.52%) y de Acta Ortopédica Mexicana (8.52%). La institución con la más alta productividad fue el Instituto Nacional de Rehabilitación «Luis Guillermo Ibarra Ibarra¼ (17.57%), seguida del Centro Médico Nacional de Occidente del IMSS (6.67%) y del Centro Médico ABC (5.44%). Conclusiones: el número de artículos publicados en el campo de cirugía de columna ha incrementado rápidamente en los últimos 15 años. Las publicaciones escritas en inglés son las más citadas. La distribución geográfica de la investigación en este campo en México está centralizada, realizándose la mayor parte de las publicaciones en la región centro-sur del país (66.16%).

Abstract: Introduction: bibliometric analysis is a useful way of assessing the past, present and future publications related to a given area in a qualitative and quantitative way. Objective: to determine characteristics of national authors productivity in the field of spine surgery research across the time. Material and methods: an online research was performed using the Elsevier´s database Scopus in October, 2021. All studies were assessed for the following parameters: year, title, access, language, journal, type of article, focus of research, objective of research, cites, authors and institutions. Results: a total of 404 publications were identified between 1973 and 2021. Between 1991-2000 decade to 2011-2021 decade the number of published articles tended to increase by 68.28 times. The largest number of articles was from South-Central Region (66.16%), followed by Western (15.03%) and Northwest (8.27%). The highest h-index was found for USA journals (102). The highest number of articles was published in Coluna/Columna (15.53%), followed by Cirugía y Cirujanos (10.52%) and Acta Ortopédica Mexicana (8.52%). Instituto Nacional de Rehabilitación published the largest number of articles (17.57%), followed by Centro Médico Nacional de Occidente del IMSS (6.67%) and Centro Médico ABC (5.44%). Conclusions: the number of articles published in the field of spine surgery in Mexico has increased rapidly in the past 15 years. In terms of quality, publications written in English are the most cited. The geographical distribution of research in Mexico is centralized, the largest number of publications was from South-Central Region of Mexico.

Envisioning the Financial and Psychological Hardships of Cancer

Cancer is one of the leading causes of premature death and disability worldwide. With the progress of the health-care system, the cost of cancer treatment is also rising. Poor households suffer disproportionately from the financial burden of cancer treatment, which has pushed many households into poverty. Thus, cancer poses an economic burden for individuals, families, societies, and governments because of the prolonged medical costs, out-of-pocket expenditures, loss of productivity, and premature deaths. Moreover, the psychological breakdown phenomenon and social implications of cancer play a vital role in dealing with cancer patients. The psychological effect of battling with cancer falls not only on the patient but also on the caregivers and family members. With these backgrounds, an attempt is made in this review paper to highlight the implications of cancer on financial and psychological aspects.

Employment creation in industrial sector in rural areas and its effectiveness in the productivity and economic development - A Conceptual Study

This paper examines the potential for industrial sector-specific productivity growth in that, human capital, economic growth of the industry, and infrastructure to contribute to the development of stable, well-paid employment in rural areas of low-income groups in India. In this paper the particular emphasis is placed on the creation of the employment and its applications in the rural areas. The employment creation and its way that different sectors of the rural economy interact with its new applications help us to know the implications on economy. A simple theoretical and conceptual framework and the descriptive analysis of available secondary data from India scenario and Indian rural areas suggests that more emphasis should be placed on increasing the productivity of the employees so that they can incorporate local areas to grow to a developed extent. This paper mainly focusses the targeted rural regions where the manpower can be utilized to increase the productivity and also helps in achieving the greater outcome which can be major contribution to economic growth and development. India can be regarded as developed country only when the major rural population gets literate, acquire employment and contributes towards the growth of the country through knowledge, standards and performance. This can be achieved through the creation of such opportunities to rural poor by introduction of various sectors and its advancements.

Dinámicas de producción y emisiones modeladas de gases de efecto invernadero en sistemas regionales de producción lechera de Honduras / Production dynamics and greenhouse gas modeled emissions from regional dairy production systems in Honduras

RESUMEN El objetivo del estudio fue la caracterización productiva y de emisiones modeladas de gases de efecto invernadero (GEI) en 61 sistemas lecheros localizados en cinco regiones de Honduras. Durante las fases inicial (FI) y final (FF), con encuestas aplicadas individualmente a los productores, se identificaron aspectos técnicos y de productividad. Variables numéricas expresadas en Microsoft Excel ® permitieron, con el modelo FAO de evaluación ambiental de la ganadería global-interactivo (GLEAM-i, por sus siglas en inglés) de ciclo de vida, estimar emisiones anuales de metano (CH4), óxido nitroso (N2O) y dióxido de carbono (CO2) en cada finca. Cálculos intermedios (GEI/animal) fueron derivados de la modelización GLEAM-i en Excel®. Durante la FI las fincas conjuntamente emitieron 25.038 t CO2 equivalente (CO2-eq), mientras que dichas emisiones fueron 10,5% menores en la FF. Emisiones de GEI/animal (2,85 ± 0,08 t CO2-eq) y de GEI/kg de proteína láctea (96,91 ± 4,50 kg CO2-eq) durante la FI fue-ron 13 y 21% menores en la FF, respectivamente. Valores de 52,82 ± 1,64 (CH4) y 2,66 ± 0,10 (N2O) kg/animal en la FI fueron 13% y 17% menores en la FF, respectivamente. La región Centro-Sur-Oriente emitió la menor cantidad de CH4 (42,95 ± 2,37 kg/animal) y N2O (1,82 ± 0,15 kg/animal, mientras las regiones Occidente y Norte experimentaron una reducción del 27% en GEI/kg proteína láctea entre la FI y FF. Se concluyó que la metodologia usada identificó los impactos productivos y medioambientales, derivados de alternativas técnicas implementadas en sistemas de producción lechera de Honduras.

ABSTRACT The study aimed to characterize production dynamics and greenhouse gas (GHG) emissions from 61 dairy farms in five regions in Honduras. Farm data were collected through individual surveys during the initial and final phases (IP; FP). Using Microsoft Excel, data was incorporated into the global livestock environmental assessment model-interactive (GLEAM-i, FAO) life cycle framework to estimate annual emissions of methane (CH4), nitrous oxide (N2O), and carbon dioxide (CO2) at the farm system level. Animal emissions (GHG/animal) were derived in Excel® from the GLEAM-i predictions. Together, farms during the IP emitted 25.038 t CO2 equivalent (CO2-eq) while these emissions were 10,5% lower in the FP. Emissions of GHG/animal (2,85 ± 0,08 t CO2-eq) and GHG/kg of milk protein (96,91 ± 4,50 kg CO2-eq) during the IP were 13% and 21% lower in the FP, respectively. Methane and N2O emission values (52,82 ± 1,64 vs. 2,66 ± 0,10 kg/animal) were 13% and 17% higher in the IP than in FP. The South-Central region emitted the lowest amount of CH4 and N2O (42,95 ± 2,37 kg/animal vs. 1,82 ± 0,15 kg/animal) while 27% lower GHG/kg milk protein was observed between the IP and FP of the Western and Northern regions. It was concluded that the used methodology identified productive and environmental impacts derived from implemented technical interventions in dairy production systems in Honduras.

Agronomic assessment of 32 sour passionfruit genotypes in federal district

The production of passion fruit is important in Brazil. In order to contribute to the development of the most promising cultivars of passion fruit, this study aimed to evaluate the agronomic performance of 32 genotypes of passion fruit in Federal District of Brazil, and to estimate genetic parameters for use in breeding programs. Thirty-two genotypes were used in a randomized block design, with eight plants per plot and four replications. The experiment was conducted in field. Twenty-eight harvests were performed, and the variables analyzed were: productivity estimated, total number of fruits per hectare, average fruit weight and these characteristics following classification of fruits in five categories. The genotypes that presented the highest total yield estimated were MAR20 # 23, AR 01 and PLANTA 7. For industrial purposes, genotypes MAR 20 # 21 and BRS Gigante Amarelo were superior. For fresh consumption, the genotypes with the best performance were PLANT 7, AR 01 and MSC. Total productivity estimated and total number of fruits per hectare in the first-class classification showed high values of heritability and CVg/CVe ratio. These results indicate a favorable condition for selection.

Agronomic performance of salad tomatoes grown in different conduction systems and fertilization doses

Looking to reduce the cost and maximize tomato productivity, this study aimed to evaluate fertilizer doses and conduction systems. For this, a field experiment was carried out in randomized blocks, in a simple factorial scheme, which consists in four fertilizer doses, (50, 100, 150 and 200% dose), and four conduction systems (with one or two plants per pit, and one or two stems per plant). Plants were spaced 0.44m and 1.5m between lines. Each plot consisted of 10 plants. The evaluated characteristics were fruit mass, number of fruits, total production per plant and pit, longitudinal and transversal dimension of the fruit. Under the experiment conditions, interactions were observed between fertilization and conduction only for the transversal and longitudinal diameter. The C4 conduction system showed superior results for the estimated yield when compared to the treatments containing only one plant per pit (C1 and C2). For the fertilizer doses, the observed yield was 142.68 t ha -1, in the 150% dose, and 114.84 t ha -1 for the 50% dose. The highest production per pit was obtained in the 150% fertilizer dose and the C4 conduction, but this treatment showed a lower average fruit mass. The treatment with two plants per pit and two stems provided lower fruit average mass than the treatments containing a single plant. The fertilization influenced only in the longitudinal diameter, and the largest diameter was observed in the recommended fertilization dose. Aiming at cost/efficiency relation, the 100% dose and the C3 were considered the best treatments.